Knights of Guinevere Character Sheets with Hero Profiles and Ability Guides > Cheditor5 연동 테스트 게시판

Recommendation: Start each profile with a 40-point attribute pool split across Strength 8–12, Agility 6–10, Intelligence 4–8, Charisma 6–10; reserve 6 points for Constitution, Perception, Luck. Give every build two signature talents. Use Base HP = 50 + Constitution × 5. Armor values should be light 2, medium 4, heavy 6. Set the standard resource pool at 30 energy, with most skills costing 5–15 energy and cooling down in 1–3 turns.

Build every role card around six sections: identity (name and epithet), archetype tag, stat block, equipment list, active traits with precise formulas, and passive traits with trigger conditions. List hard numbers for every action: "Judicator's Strike" = 10–16 physical damage, 0.8 × Strength scaling, 20% stun chance, 8 energy cost, 2-turn cooldown. "Bastion Ward" should grant 12–18 shield for 2 turns, scale with Charisma, and use a 3-turn cooldown. A skirmisher archetype should use roughly 0.9 Agility scaling, 12–20 base damage, 6 energy mobility actions, and 1-turn cooldown cycles.

XP progression model: Set progression at 100 XP for each level from 1 to 5, then 200 XP per level from 6 to 10. Award 1 talent point per level, bonus attribute point every 3 levels; cap attributes at 15 for balance. The playtest method should use 10 standard combats versus benchmark opponents with fixed stats, while logging average damage, survival rate, and average leftover resources. Use these balance goals: frontline builds survive more than 70% of runs while dealing 12–18 DPR, skirmishers hold 18–26 DPR with mobility uptime above 40%, and caster-blade hybrids reach 20–30 DPR with roughly 30% control uptime.

Gear scaling guidelines: Use weapon scaling of 6–10 for tier 1, 11–16 for tier 2, and 17–24 for tier 3. Standard enchantments can provide +2 flat damage or +10% coefficient scaling on skills. Use relic slot scaling of 2 slots for levels 1–4, 3 for levels 5–8, and 4 for levels 9–10. For any named build, focus on one primary damage engine, one defensive passive, and one utility slot, since that creates cleaner play patterns and faster balance iteration.

Character Build Guide: Stats, Talents, and Gear

Starter allocation recommendation: Adopt a 40-point attribute model for Strength, Agility, Endurance, Willpower, Charisma, and Lore, with minimum 3, maximum 18, a 2-point cost above 10, and a 1-point refund below 10.

Choose a party niche first: frontline tank for absorbing damage, midrange striker for reliable output, or support buffer for crowd control plus sustain. Start with 10 skill points divided among Weapon Proficiency, Survival, Diplomacy, and Arcana, and do not exceed 5 points in one skill.

Select one origin trait for a passive bonus: Noble gives +2 Charisma in NPC interactions, Soldier grants +1 Strength and access to basic armor, and Scholar provides +2 Lore plus bonus checks for arcane tasks. Write down the stat modifications from the origin trait before confirming the final spread.

Starting equipment budget: 100 gold. Recommended baseline buyout: medium armor 40g, longsword 30g, healing potion ×2 at 10g each, torch 1g. Reserve 9g for unexpected fees or travel costs.

Maximize synergy by combining talents with multiplying effects: Stalwart plus Shield Mastery lowers incoming damage, while Arcane Focus with Mana Conduit improves sustained spell uptime. Pay attention to trade-offs, since heavy armor hurts Agility-based evasion, while high Charisma improves barter outcomes but lowers stealth effectiveness.

Level progression plan for levels 1–7: levels 1–3 push a primary stat to 14, levels 4–6 raise a secondary stat to 12, level 7 select a signature talent that defines playstyle. Spend early-tier talent points on passive survivability rather than situational active perks.

For playtesting, run three standard scenarios: solo skirmish, coordinated assault, and timed objective. Measure average DPR, survival percentage, and resource consumption for each encounter, then tune stat allocation, gear selection, and origin choice after at least five runs per scenario.

Final verification: verify role clarity, confirm sustainable resources at leveling breakpoints, and ensure there is at least one reliable escape option before finalizing long-term progression.

Step-by-Step Guide to Building Your Knight

Use this core stat spread for a frontline protector with social presence: Strength 16, Constitution 14, Dexterity 12, Intelligence 8, Wisdom 10, Charisma 14; move points between STR and CHA for a leader build or STR and CON for a pure tank.

Step 1 – Choose a specialization: Guardian (shield-heavy defender), Cavalier (mounted shock trooper), Duelist (two-handed precision), or Tactician (support with tactical feats). Choose one primary combat style and one secondary role such as battlefield control or party buffer.

Step 2 – Core defenses and gear: Aim for an effective defense of 18–22 at level 1. Wear the heaviest armor your proficiencies allow, and use a large shield if you are building Guardian or Cavalier. Look first for a helm with +1 saves or resistance and a shield carrying a minimum +1 stability modifier, if the gear pool allows it.

Step 3 – Configure offense: Use a versatile one-handed sword at 1d8–1d10 with shield bash support for shield builds, and a reach or high-dice two-hander at 1d10–1d12 for duelists, ideally with a stance that increases crit range or penetration. Allocate attack-boosting talents such as Power Attack and Precision Strike equivalents at the first feat/advancement opportunities.

Step 4 – Skill point setup: A level 1 skill template is Athletics 4, Riding 3 for mounted builds, Diplomacy 2, and Perception 4; only shift two points into Stealth when designing a light-armor concept. Early progression should maintain a 2:1 split of combat ranks to out-of-combat proficiencies.

Step 5 – Talent progression roadmap: Levels 1–4: defensive feats (Shield Mastery, Improved Guard); Levels 5–8: offensive/utility split (Mounted Tactics, Combat Reflexes, Tactical Sweep); Levels 9+: signature maneuvers or a prestige path that grants a unique trait. At the first two major stat increase points, raise STR to 18 first and CON to 16 second.

Step 6 – Synergy combos and consumables: Pair shield wall with an area taunt for chokepoint control, and run a reach spear with sentinel perks when you need to shut down enemy movement. Recommended consumables are 6 healing potions, 3 antidotes, and 2 temporary-armor buffs per day. Use a polearm if the encounter objective shifts toward crowd control.

Example build (level 7 Guardian): STR 18, CON 16, DEX 12, WIS 10, INT 8, CHA 14; feats: Shield Mastery, Power Attack, Combat Reflexes, Improved Guard, Mounted Tactics; gear: full plate, tower shield +1, longsword +2, amulet of fortitude. Gameplay loop: pull enemy attention, cycle taunt each round, convert opportunity attacks into pressure, and hold chokepoints while teammates deal damage.

How to Choose the Right Knight Build Role

Choose the role before spending points; follow one of the templates below and modify no more than ±2 points per stat if you want to keep the class mechanics intact.

• 
  
• 
  

  Bulwark (tank build)

  
  
  • 
    
  • 50-point pool distribution: Con 28, Str 14, Dex 4, Int 2, Wis 1, Cha 1
    
  • Primary talents (level priority): Shield Mastery → Taunt Pulse → Fortify Aura
    
  • Core gear setup: Heavy plate + kite shield + reinforced helm (look for +30% phys mitigation, +12% threat generation, -8% movement)
    
  • Combat pattern: Hold aggro, anchor choke points, refresh taunt every 10s
    
  
  
  
  
• 
  

  Vanguard (melee DPS)

  
  
  • 
    
  • 50-point stat distribution: Str 30, Dex 10, Con 6, Int 2, Wis 1, Cha 1
    
  • Primary talent path: Power Strike → Cleave → Overhand Finish
    
  • Recommended gear archetype: Two-handed sword or polearm with brutal edge (+18% base damage, +12% crit damage, -6% attack speed)
    
  • Play pattern: Open with gap closer, use cleave on clustered foes, reserve stamina for burst windows
    
  
  
  
  
• 
  

  Skirmisher (kite-focused archetype)

  
  
  • 
    
  • 50-point pool distribution: Dex 28, Str 12, Con 6, Int 2, Wis 1, Cha 1
    
  • Primary talent path: Precision Shot → Rapid Fire → Evasion Roll
    
  • Recommended gear archetype: Composite bow/crossbow + leather + quiver with piercing bolts (+22% ranged crit, +10% attack speed)
    
  • Combat pattern: Kite targets, prioritize fragile enemies, keep 20–30m spacing
    
  
  
  
  
• 
  

  Mystic (caster support build)

  
  
  • 
    
  • 50-point pool distribution: Int 30, Wis 10, Cha 4, Con 3, Dex 2, Str 1
    
  • Primary talents: Arcane Channel → Mana Well → Protective Ward
    
  • Recommended gear archetype: Robes + focus staff with mana regen and spell potency (+25% spell power, +18% mana regen)
    
  • Combat pattern: Control battlefield with roots/stuns, prioritize casting order for interrupts
    
  
  
  
  
• 
  

  Healer (primary restoration)

  
  
  • 
    
  • Recommended 50-point distribution: Wis 28, Int 12, Cha 6, Con 2, Dex 1, Str 1
    
  • Primary talents: Pulse Heal → Cleanse → Revival Tome
    
  • Core gear setup: Light armor + holy emblem (+30% heal potency, +20% cooldown reduction)
    
  • Recommended play pattern: Triage by threat level, watch independent series conserve large heals for <35% HP windows
    
  
  
  

Skill allocation rules:

1. 
   
2. Focus on one main tree until level 10 before spending heavily in a secondary tree; the key breakpoints are level 5 for Tier II passives and level 10 for the signature skill.
   
3. Keep 2 utility slots open for mobility or crowd control, since they reduce downtime in group content.
   
4. For hybrid builds, maintain a minimum of 12 points in the secondary stat to avoid severe performance penalties.
   

Recommended 3-player party compositions:

• 
  
• Bulwark + Vanguard + Mystic offers a strong frontline, sustained damage output, and dependable crowd control.
  
• Bulwark + Skirmisher + Healer: high single-target output with survivability for extended fights.
  
• Vanguard + Skirmisher + Mystic is an offensive composition built around aggressive skirmishing and stacked CC.
  

Progression milestones and recommended choices:

• 
  
• Levels 1–5 should lock in role identity: defensive passives for tanks, single-target damage tools for DPS, and baseline healing for restoration builds.
  
• Between levels 6 and 10, choose one cooldown reduction talent and one efficiency talent to stabilize power growth.
  
• Levels 11–15 are for choosing the signature capstone or ultimate, ideally one that complements team composition, such as extra control for parties without CC.
  

Build tuning recommendation: reallocate up to 6 points after major equipment upgrades; against heavy magic damage, move 4–6 points from Strength or Dexterity into Intelligence or Wisdom based on class rules.

Knight Class and Build FAQ:

How are Knight archetypes like Templar, Warden, and Duelist separated on the character sheets?

The character sheets distinguish archetypes through three main layers: base stats, passive traits, and signature actions. Base stats define the core function: Templars emphasize Constitution and Armor, Wardens focus on Strength plus Shield Mastery, and Duelists rely on Dexterity and Precision. Passive traits are compact rules that trigger automatically (example: Templar's Bulwark grants damage reduction while on Guard; Duelist's Momentum increases crit chance after moving). Signature actions are unique skills with set costs, ranges, and cooldowns, and they define the archetype playstyle—area protection for Templars, control and disengage for Wardens, and single-target burst for Duelists. Equipment slots and proficiency lists strengthen the distinction further, since each archetype favors different weapon groups and armor classes. In the final layer, advancement choices through talents or ability branches let players reinforce a preferred role or make limited pivots while preserving archetype identity.

What determines signature ability scaling from levels and gear?

Signature ability potency is driven by discrete scaling tiers: ability rank (gained through character level or talent points), gear modifiers, and conditional multipliers. Rank progression increases base metrics—damage, duration, and radius—using fixed per-rank increments. Equipment scaling adds flat bonuses, percent modifiers, and sometimes extra effects like status application or elemental damage. Conditional scaling comes from build synergies, where a weapon match or attribute threshold grants extra benefits. Leveling typically does not reduce costs or cooldowns much, since scaling is aimed at stronger output and added effects rather than trivial resource use.

Can I mix abilities from two different Knight sheets to create a hybrid hero, and what balance issues should I watch?

Combining sheets is typically allowed, but only under constraints that prevent balance abuse. Common limits include one signature ability from outside the archetype, a cap on cross-class passive traits, and attribute prerequisites for stronger effects. The biggest hybrid balance dangers are defensive stacking, cheap burst combinations, and repeated cooldown-reset chains. You can manage the risk by requiring penalties to a core stat, increasing resource sinks with repeated ability use, limiting passive trigger frequency per round, or forcing referee-approved playtesting. The best practical approach is to write down every interaction, test a few turns against benchmark encounters, and convert any overpowered passive into an activated limited-use ability.

How are non-combat abilities like diplomacy, crafting, and scouting handled on the sheets?

Non-combat functions appear on the sheets as skills with ranks and specialization tracks. Each non-combat skill is tied to a primary attribute, such as Charisma for diplomacy, Intelligence for crafting, and Perception for scouting, with proficiency levels granting dice or bonus pools. Some versions also include active social or downtime talents, such as "Silver Tongue," which grants a flat persuasion bonus once per session. Crafting integrates material costs, time, and schematic tiers; higher-quality tools or components modify outcome probabilities listed on the sheet. Scouting gives direct mechanical value through extended vision, ambush modifiers, and trap-spotting chances, represented as check modifiers. Rules for advancement let players convert experience into new ranks or unlock specialized maneuvers tied to those skills.